Frequently asked questions

Usage & Limitations

What is the difference between a repo on an external hard drive vs. repo on a server?

If Borg is running in client/server mode, the client uses SSH as a transport to talk to the remote agent, which is another Borg process (Borg is installed on the server, too) started automatically by the client. The Borg server is doing storage-related low-level repo operations (list, load and store objects), while the Borg client does the high-level stuff: deduplication, encryption, compression, dealing with archives, backups, restores, etc., which reduces the amount of data that goes over the network.

When Borg is writing to a repo on a locally mounted remote file system, e.g. SSHFS, the Borg client only can do file system operations and has no agent running on the remote side, so every operation needs to go over the network, which is slower.

Can I back up from multiple servers into a single repository?

Yes, you can! Even simultaneously.

Can I back up to multiple, swapped backup targets?

It is possible to swap your backup disks if each backup medium is assigned its own repository by creating a new one with borg repo-create.

Can I copy or synchronize my repo to another location?

If you want to have redundant backup repositories (preferably at separate locations), the recommended way to do that is like this:

• borg repo-create repo1 --encryption=X

• borg repo-create repo2 --encryption=X --other-repo=repo1

• maybe do a snapshot to have stable and same input data for both borg create.

• client machine ---borg create---> repo1

• client machine ---borg create---> repo2

This will create distinct (different repo ID), but related repositories. Related means using the same chunker secret and the same id_key, thus producing the same chunks / the same chunk ids if the input data is the same.

The 2 independent borg create invocations mean that there is no error propagation from repo1 to repo2 when done like that.

An alternative way would be to use borg transfer to copy backup archives from repo1 to repo2. Likely a bit more efficient and the archives would be identical, but suffering from potential error propagation.

Warning: using borg with multiple repositories with identical repository ID (like when creating 1:1 repository copies) is not supported and can lead to all sorts of issues, like e.g. cache coherency issues, malfunction, data corruption.

“this is either an attack or unsafe” warning

About the warning:

Cache, or information obtained from the security directory is newer than repository - this is either an attack or unsafe (multiple repos with same ID)

“unsafe”: If not following the advice from the previous section, you can easily run into this by yourself by restoring an older copy of your repository.

“attack”: maybe an attacker has replaced your repo by an older copy, trying to trick you into AES counter reuse, trying to break your repo encryption.

Borg users have also reported that fs issues (like hw issues / I/O errors causing the fs to become read-only) can cause this warning, see #7853.

If you decide to ignore this and accept unsafe operation for this repository, you could delete the manifest-timestamp and the local cache:

borg config id   # shows the REPO_ID
rm ~/.config/borg/security/REPO_ID/manifest-timestamp
borg repo-delete --cache-only

This is an unsafe and unsupported way to use borg, you have been warned.

Which file types, attributes, etc. are not preserved?

• UNIX domain sockets (because it does not make sense - they are meaningless without the running process that created them and the process needs to recreate them in any case). So, don’t panic if your backup misses a UDS!

• The precise on-disk (or rather: not-on-disk) representation of the holes in a sparse file. Archive creation has no special support for sparse files, holes are backed up as (deduplicated and compressed) runs of zero bytes. Archive extraction has optional support to extract all-zero chunks as holes in a sparse file.

• Some filesystem specific attributes, like btrfs NOCOW, see Support for file metadata.

Are there other known limitations?

• borg extract supports restoring only into an empty destination. After extraction, the destination will have exactly the contents of the extracted archive. If you extract into a non-empty destination, borg will (for example) not remove files which are in the destination, but not in the archive. See #4598 for a workaround and more details.

If a backup stops mid-way, does the already-backed-up data stay there?

Yes, the data transferred into the repo stays there - just avoid running borg compact before you completed the backup, because that would remove chunks that were already transferred to the repo, but not (yet) referenced by an archive.

If a backup was interrupted, you normally do not need to do anything special, just invoke borg create as you always do. You may use the same archive name as in previous attempt or a different one (e.g. if you always include the current datetime), it does not matter.

Borg always does full single-pass backups, so it will start again from the beginning - but it will be much faster, because some of the data was already stored into the repo, so it does not need to get transmitted and stored again.

How can I back up huge file(s) over a unstable connection?

Yes. For more details, see If a backup stops mid-way, does the already-backed-up data stay there?.

How can I restore huge file(s) over an unstable connection?

Try using borg mount and rsync (or a similar tool that supports resuming a partial file copy from what’s already copied).

How can I switch append-only mode on and off?

You could do that (via borg config REPO append_only 0/1), but using different ssh keys and different entries in authorized_keys is much easier and also maybe has less potential of things going wrong somehow.

My machine goes to sleep causing Broken pipe

While backing up your data over the network, your machine should not go to sleep. On macOS you can use caffeinate to avoid that.

How can I compare contents of an archive to my local filesystem?

You can instruct export-tar to send a tar stream to the stdout, and then use tar to perform the comparison:

borg export-tar archive-name - | tar --compare -f - -C /path/to/compare/to

Can Borg add redundancy to the backup data to deal with hardware malfunction?

No, it can’t. While that at first sounds like a good idea to defend against some defect HDD sectors or SSD flash blocks, dealing with this in a reliable way needs a lot of low-level storage layout information and control which we do not have (and also can’t get, even if we wanted).

So, if you need that, consider RAID or a filesystem that offers redundant storage or just make backups to different locations / different hardware.

See also #225.

Can Borg verify data integrity of a backup archive?

Yes, if you want to detect accidental data damage (like bit rot), use the check operation. It will notice corruption using CRCs and hashes. If you want to be able to detect malicious tampering also, use an encrypted repo. It will then be able to check using CRCs and HMACs.

I get an IntegrityError or similar - what now?

A single error does not necessarily indicate bad hardware or a Borg bug. All hardware exhibits a bit error rate (BER). Hard drives are typically specified as exhibiting fewer than one error every 12 to 120 TB (one bit error in 10e14 to 10e15 bits). The specification is often called unrecoverable read error rate (URE rate).

Apart from these very rare errors there are two main causes of errors:

1. Defective hardware: described below.

2. Bugs in software (Borg, operating system, libraries): Ensure software is up to date. Check whether the issue is caused by any fixed bugs described in Important notes 2.x.

Finding defective hardware

Note

Hardware diagnostics are operating system dependent and do not apply universally. The commands shown apply for popular Unix-like systems. Refer to your operating system’s manual.

Checking hard drives

Find the drive containing the repository and use findmnt, mount or lsblk to learn the device path (typically /dev/…) of the drive. Then, smartmontools can retrieve self-diagnostics of the drive in question:

# smartctl -a /dev/sdSomething

The Offline_Uncorrectable, Current_Pending_Sector and Reported_Uncorrect attributes indicate data corruption. A high UDMA_CRC_Error_Count usually indicates a bad cable.

I/O errors logged by the system (refer to the system journal or dmesg) can point to issues as well. I/O errors only affecting the file system easily go unnoticed, since they are not reported to applications (e.g. Borg), while these errors can still corrupt data.

Drives can corrupt some sectors in one event, while remaining reliable otherwise. Conversely, drives can fail completely with no advance warning. If in doubt, copy all data from the drive in question to another drive -- just in case it fails completely.

If any of these are suspicious, a self-test is recommended:

# smartctl -t long /dev/sdSomething

Running fsck if not done already might yield further insights.

Checking memory

Intermittent issues, such as borg check finding errors inconsistently between runs, are frequently caused by bad memory.

Run memtest86+ (or an equivalent memory tester) to verify that the memory subsystem is operating correctly.

Checking processors

Processors rarely cause errors. If they do, they are usually overclocked or otherwise operated outside their specifications. We do not recommend to operate hardware outside its specifications for productive use.

Tools to verify correct processor operation include Prime95 (mprime), linpack, and the Intel Processor Diagnostic Tool (applies only to Intel processors).

Repairing a damaged repository

With any defective hardware found and replaced, the damage done to the repository needs to be ascertained and fixed.

borg check provides diagnostics and --repair options for repositories with issues. We recommend to first run without --repair to assess the situation. If the found issues and proposed repairs seem right, re-run “check” with --repair enabled.

How probable is it to get a hash collision problem?

If you noticed, there are some issues (#170 (warning: hell) and #4884) about the probability of a chunk having the same hash as another chunk, making the file corrupted because it grabbed the wrong chunk. This is called the Birthday Problem.

There is a lot of probability in here so, I can give you my interpretation of such math but it’s honestly better that you read it yourself and grab your own resolution from that.

Assuming that all your chunks have a size of \(2^{21}\) bytes (approximately 2.1 MB) and we have a “perfect” hash algorithm, we can think that the probability of collision would be of \(p^2/2^{n+1}\) then, using SHA-256 (\(n=256\)) and for example we have 1000 million chunks (\(p=10^9\)) (1000 million chunks would be about 2100TB). The probability would be around 0.0000000000000000000000000000000000000000000000000000000000043.

A mass-murderer space rock happens about once every 30 million years on average. This leads to a probability of such an event occurring in the next second to about \(10^{-15}\). That’s 45 orders of magnitude more probable than the SHA-256 collision. Briefly stated, if you find SHA-256 collisions scary then your priorities are wrong. This example was grabbed from this SO answer, it’s great honestly.

Still, the real question is whether Borg tries not to make this happen?

Well… previously it did not check anything until there was a feature added which saves the size of the chunks too, so the size of the chunks is compared to the size that you got with the hash and if the check says there is a mismatch it will raise an exception instead of corrupting the file. This doesn’t save us from everything but reduces the chances of corruption. There are other ways of trying to escape this but it would affect performance so much that it wouldn’t be worth it and it would contradict Borg’s design, so if you don’t want this to happen, simply don’t use Borg.

Why is the time elapsed in the archive stats different from wall clock time?

Borg needs to write the time elapsed into the archive metadata before finalizing the archive and saving the files cache. This means when Borg is run with e.g. the time command, the duration shown in the archive stats may be shorter than the full time the command runs for.

How do I configure different prune policies for different directories?

Say you want to prune /var/log faster than the rest of /. How do we implement that? The answer is to back up to different archive names and then implement different prune policies for different prefixes. For example, you could have a script that does:

borg create --exclude var/log main-$(date +%Y-%m-%d) /
borg create logs-$(date +%Y-%m-%d) /var/log

Then you would have two different prune calls with different policies:

borg prune --verbose --list -d 30 -a 'sh:main-*'
borg prune --verbose --list -d 7  -a 'sh:logs-*'

This will keep 7 days of logs and 30 days of everything else.

How do I remove files from an existing backup?

A file is only removed from a BorgBackup repository if all archives that contain the file are deleted and the corresponding data chunks are removed from the repository. There are two ways how to remove files from a repository.

1. Use borg delete to remove all archives that contain the files. This will of course delete everything in the archive, not only some files.

2. If you really want to remove only some specific files, you can run the borg recreate command to rewrite all archives with a different --exclude pattern. See the examples in the manpage for more information.

Finally, run borg compact to delete the data chunks from the repository.

Can I safely change the compression level or algorithm?

The compression level and algorithm don’t affect deduplication. Chunk ID hashes are calculated before compression. New compression settings will only be applied to new chunks, not existing chunks. So it’s safe to change them.

Use borg repo-compress to efficiently recompress a complete repository.

Security

How important is the $HOME/.config/borg directory?

The Borg config directory has content that you should take care of:

keys subdirectory

All your borg keyfile keys are stored in this directory. Please note that borg repokey keys are stored inside the repository. You MUST make sure to have an independent backup of these keyfiles, otherwise you cannot access your backups anymore if you lose them. You also MUST keep these files secret; everyone who gains access to your repository and has the corresponding keyfile (and the key passphrase) can extract it.

Make sure that only you have access to the Borg config directory.

How important is the $HOME/.local/share/borg directory?

The Borg data directory has content that you should take care of:

security subdirectory

Each directory here represents one Borg repository by its ID and contains the last known status. If a repository’s status is different from this information at the beginning of BorgBackup operation, Borg outputs warning messages and asks for confirmation, so make sure you do not lose or manipulate these files. However, apart from those warnings, a loss of these files can be recovered.

Make sure that only you have access to the Borg data directory.

Do I need to take security precautions regarding the cache?

The cache contains a lot of metadata information about the files in your repositories and it is not encrypted.

However, the assumption is that the cache is being stored on the very same system which also contains the original files which are being backed up. So someone with access to the cache files would also have access the original files anyway.

The Internals section contains more details about The cache. If you ever need to move the cache to a different location, this can be achieved by using the appropriate Environment Variables.

How can I specify the encryption passphrase programmatically?

There are several ways to specify a passphrase without human intervention:

Setting BORG_PASSPHRASE

The passphrase can be specified using the BORG_PASSPHRASE environment variable. This is often the simplest option, but can be insecure if the script that sets it is world-readable.

Note

Be careful how you set the environment; using the env command, a system() call or using inline shell scripts (e.g. BORG_PASSPHRASE=hunter2 borg ...) might expose the credentials in the process list directly and they will be readable to all users on a system. Using export in a shell script file should be safe, however, as the environment of a process is accessible only to that user.

Using BORG_PASSCOMMAND with a file of proper permissions

Another option is to create a file with a password in it in your home directory and use permissions to keep anyone else from reading it. For example, first create a key:

(umask 0077; head -c 32 /dev/urandom | base64 -w 0 > ~/.borg-passphrase)

Then in an automated script one can put:

export BORG_PASSCOMMAND="cat $HOME/.borg-passphrase"

and Borg will automatically use that passphrase.

Using keyfile-based encryption with a blank passphrase

It is possible to encrypt your repository in keyfile mode instead of the default repokey mode and use a blank passphrase for the key file (simply press Enter twice when borg repo-create asks for the password). See Repository encryption for more details.

Using BORG_PASSCOMMAND with macOS Keychain

macOS has a native manager for secrets (such as passphrases) which is safer than just using a file as it is encrypted at rest and unlocked manually (fortunately, the login keyring automatically unlocks when you log in). With the built-in security command, you can access it from the command line, making it useful for BORG_PASSCOMMAND.

First generate a passphrase and use security to save it to your login (default) keychain:

security add-generic-password -D secret -U -a $USER -s borg-passphrase -w $(head -c 32 /dev/urandom | base64 -w 0)

In your backup script retrieve it in the BORG_PASSCOMMAND:

export BORG_PASSCOMMAND="security find-generic-password -a $USER -s borg-passphrase -w"

Using BORG_PASSCOMMAND with GNOME Keyring

GNOME also has a keyring daemon that can be used to store a Borg passphrase. First ensure libsecret-tools, gnome-keyring and libpam-gnome-keyring are installed. If libpam-gnome-keyring wasn’t already installed, ensure it runs on login:

sudo sh -c "echo session optional pam_gnome_keyring.so auto_start >> /etc/pam.d/login"
sudo sh -c "echo password optional pam_gnome_keyring.so >> /etc/pam.d/passwd"
# you may need to relogin afterwards to activate the login keyring

Then add a secret to the login keyring:

head -c 32 /dev/urandom | base64 -w 0 | secret-tool store borg-repository repo-name --label="Borg Passphrase"

If a dialog box pops up prompting you to pick a password for a new keychain, use your login password. If there is a checkbox for automatically unlocking on login, check it to allow backups without any user intervention whatsoever.

Once the secret is saved, retrieve it in a backup script using BORG_PASSCOMMAND:

export BORG_PASSCOMMAND="secret-tool lookup borg-repository repo-name"

Note

For this to unlock the keychain automatically it must be run in the dbus session of an unlocked terminal; for example, running a backup script as a cron job might not work unless you also export DISPLAY=:0 so secret-tool can pick up your open session. It gets even more complicated when you are running the tool as a different user (e.g. running a backup as root with the password stored in the user keyring).

Using BORG_PASSCOMMAND with KWallet

KDE also has a keychain feature in the form of KWallet. The command-line tool kwalletcli can be used to store and retrieve secrets. Ensure kwalletcli is installed, generate a passphrase, and store it in your “wallet”:

head -c 32 /dev/urandom | base64 -w 0 | kwalletcli -Pe borg-passphrase -f Passwords

Once the secret is saved, retrieve it in a backup script using BORG_PASSCOMMAND:

export BORG_PASSCOMMAND="kwalletcli -e borg-passphrase -f Passwords"

When backing up to remote encrypted repos, is encryption done locally?

Yes, file and directory metadata and data is locally encrypted, before leaving the local machine. We do not mean the transport layer encryption by that, but the data/metadata itself. Transport layer encryption (e.g. when ssh is used as a transport) applies additionally.

When backing up to remote servers, do I have to trust the remote server?

Yes and No.

No, as far as data confidentiality is concerned - if you use encryption, all your files/dirs data and metadata are stored in their encrypted form into the repository.

Yes, as an attacker with access to the remote server could delete (or otherwise make unavailable) all your backups.

How can I protect against a hacked backup client?

Assume you back up your backup client machine C to the backup server S and C gets hacked. In a simple push setup, the attacker could then use borg on C to delete all backups residing on S.

These are your options to protect against that:

• Do not allow to delete data permanently from the repo, see Append-only mode (forbid compaction).

• Use a pull-mode setup using ssh -R, see Backing up in pull mode for more information.

• Mount C’s filesystem on another machine and then create a backup of it.

• Do not give C filesystem-level access to S.

See Hosting repositories for a detailed protection guide.

How can I protect against a hacked backup server?

Just in case you got the impression that pull-mode backups are way more safe than push-mode, you also need to consider the case that your backup server S gets hacked. In case S has access to a lot of clients C, that might bring you into even bigger trouble than a hacked backup client in the previous FAQ entry.

These are your options to protect against that:

• Use the standard push-mode setup (see also previous FAQ entry).

• Mount (the repo part of) S’s filesystem on C.

• Do not give S file-system level access to C.

• Have your backup server at a well protected place (maybe not reachable from the internet), configure it safely, apply security updates, monitor it, …

How can I protect against theft, sabotage, lightning, fire, …?

In general: if your only backup medium is nearby the backupped machine and always connected, you can easily get into trouble: they likely share the same fate if something goes really wrong.

Thus:

• have multiple backup media

• have media disconnected from network, power, computer

• have media at another place

• have a relatively recent backup on your media

How do I report a security issue with Borg?

Send a private email to the security contact if you think you have discovered a security issue. Please disclose security issues responsibly.

Common issues

/path/to/repo is not a valid repository. Check repo config.

There can be many causes of this error. E.g. you have incorrectly specified the repository path.

You will also get this error if you try to access a repository with a key that uses the argon2 key algorithm using an old version of borg. We recommend upgrading to the latest stable version and trying again. We are sorry. We should have thought about forward compatibility and implemented a more helpful error message.

Why does Borg extract hang after some time?

When I do a borg extract, after a while all activity stops, no cpu usage, no downloads.

This may happen when the SSH connection is stuck on server side. You can configure SSH on client side to prevent this by sending keep-alive requests, for example in ~/.ssh/config:

Host borg.example.com
    # Client kills connection after 3*30 seconds without server response:
    ServerAliveInterval 30
    ServerAliveCountMax 3

You can also do the opposite and configure SSH on server side in /etc/ssh/sshd_config, to make the server send keep-alive requests to the client:

# Server kills connection after 3*30 seconds without client response:
ClientAliveInterval 30
ClientAliveCountMax 3

How can I deal with my very unstable SSH connection?

If you have issues with lost connections during long-running borg commands, you could try to work around:

• Make partial extracts like borg extract PATTERN to do multiple smaller extraction runs that complete before your connection has issues.

• Try using borg mount MOUNTPOINT and rsync -avH from MOUNTPOINT to your desired extraction directory. If the connection breaks down, just repeat that over and over again until rsync does not find anything to do any more. Due to the way borg mount works, this might be less efficient than borg extract for bigger volumes of data.

Why do I get “connection closed by remote” after a while?

When doing a backup to a remote server (using a ssh: repo URL), it sometimes stops after a while (some minutes, hours, … - not immediately) with “connection closed by remote” error message. Why?

That’s a good question and we are trying to find a good answer in #636.

Why am I seeing idle borg serve processes on the repo server?

Maybe the ssh connection between client and server broke down and that was not yet noticed on the server. Try these settings:

# /etc/ssh/sshd_config on borg repo server - kill connection to client
# after ClientAliveCountMax * ClientAliveInterval seconds with no response
ClientAliveInterval 20
ClientAliveCountMax 3

If you have multiple borg create … ; borg create … commands in a already serialized way in a single script, you need to give them --lock-wait N (with N being a bit more than the time the server needs to terminate broken down connections and release the lock).

Can I back up my root partition (/) with Borg?

Backing up your entire root partition works just fine, but remember to exclude directories that make no sense to back up, such as /dev, /proc, /sys, /tmp and /run, and to use --one-file-system if you only want to back up the root partition (and not any mounted devices e.g.).

If it crashes with a UnicodeError, what can I do?

Check if your encoding is set correctly. For most POSIX-like systems, try:

export LANG=en_US.UTF-8  # or similar, important is correct charset

If that does not help:

• check for typos, check if you really used export.

• check if you have set LC_ALL - if so, try not setting it.

• check if you generated the respective locale via locale-gen.

I can’t extract non-ascii filenames by giving them on the commandline!?

This might be due to different ways to represent some characters in unicode or due to other non-ascii encoding issues.

If you run into that, try this:

• avoid the non-ascii characters on the commandline by e.g. extracting the parent directory (or even everything)

• mount the repo using FUSE and use some file manager

What’s the expected backup performance?

Compared to simply copying files (e.g. with rsync), Borg has more work to do. This can make creation of the first archive slower, but saves time and disk space on subsequent runs. Here what Borg does when you run borg create:

• Borg chunks the file (using the relatively expensive buzhash algorithm)

• It then computes the “id” of the chunk (hmac-sha256 (slow, except if your CPU has sha256 acceleration) or blake2b (fast, in software))

• Then it checks whether this chunk is already in the repo (local hashtable lookup, fast). If so, the processing of the chunk is completed here. Otherwise it needs to process the chunk:

• Compresses (the default lz4 is super fast)

• Encrypts and authenticates (AES-OCB, usually fast if your CPU has AES acceleration as usual since about 10y, or chacha20-poly1305, fast pure-software crypto)

• Transmits to repo. If the repo is remote, this usually involves an SSH connection (does its own encryption / authentication).

• Stores the chunk into a key/value store (the key is the chunk id, the value is the data). While doing that, it computes XXH64 of the data (repo low-level checksum, used by borg check --repository).

Subsequent backups are usually very fast if most files are unchanged and only a few are new or modified. The high performance on unchanged files primarily depends only on a few factors (like FS recursion + metadata reading performance and the files cache working as expected) and much less on other factors.

E.g., for this setup:

• server grade machine (4C/8T 2013 Xeon, 64GB RAM, 2x good 7200RPM disks)

• local zfs filesystem (mirrored) containing the backup source data

• repository is remote (does not matter much for unchanged files)

• backup job runs while machine is otherwise idle

The observed performance is that Borg can process about 1 million unchanged files (and a few small changed ones) in 4 minutes!

If you are seeing much less than that in similar circumstances, read the next few FAQ entries below.

Why is my backup so slow?

If you feel your Borg backup is too slow somehow, here is what you can do:

• Make sure Borg has enough RAM (depends on how big your repo is / how many files you have)

• Use one of the blake2 modes for --encryption except if you positively know your CPU (and openssl) accelerates sha256 (then stay with hmac-sha256).

• Don’t use any expensive compression. The default is lz4 and super fast. Uncompressed is often slower than lz4.

• Just wait. You can also interrupt it and start it again as often as you like, it will converge against a valid “completed” state. It is starting from the beginning each time, but it is still faster then as it does not store data into the repo which it already has there.

• If you don’t need additional file attributes, you can disable them with --noflags, --noacls, --noxattrs. This can lead to noticeable performance improvements when your backup consists of many small files.

To see what files have changed and take more time processing, you can also add --list --filter=AME --stats to your borg create call to produce more log output, including a file list (with file status characters) and also some statistics at the end of the backup.

Then you do the backup and look at the log output:

• stats: Do you really have little changes or are there more changes than you thought? In the stats you can see the overall volume of changed data, which needed to be added to the repo. If that is a lot, that can be the reason why it is slow.

• A status (“added”) in the file list: If you see that often, you have a lot of new files (files that Borg did not find in the files cache). If you think there is something wrong with that (the file was there already in the previous backup), please read the FAQ entries below.

• M status (“modified”) in the file list: If you see that often, Borg thinks that a lot of your files might be modified (Borg found them in the files cache, but the metadata read from the filesystem did not match the metadata stored in the files cache). In such a case, Borg will need to process the files’ contents completely, which is much slower than processing unmodified files (Borg does not read their contents!). The metadata values used in this comparison are determined by the --files-cache option and could be e.g. size, ctime and inode number (see the borg create docs for more details and potential issues). You can use the stat command on files to look at fs metadata manually to debug if there is any unexpected change triggering the M status. Also, the --debug-topic=files_cache option of borg create provides a lot of debug output helping to analyse why the files cache does not give its expected high performance.

When borg runs inside a virtual machine, there are some more things to look at:

Some hypervisors (e.g. kvm on proxmox) give some broadly compatible CPU type to the VM (usually to ease migration between VM hosts of potentially different hardware CPUs).

It is broadly compatible because they leave away modern CPU features that could be not present in older or other CPUs, e.g. hardware acceleration for AES crypto, for sha2 hashes, for (P)CLMUL(QDQ) computations useful for crc32.

So, basically you pay for compatibility with bad performance. If you prefer better performance, you should try to expose the host CPU’s misc. hw acceleration features to the VM which runs borg.

On Linux, check /proc/cpuinfo for the CPU flags inside the VM. For kvm check the docs about “Host model” and “Host passthrough”.

See also the next few FAQ entries for more details.

I am seeing ‘A’ (added) status for an unchanged file!?

The files cache is used to determine whether Borg already “knows” / has backed up a file and if so, to skip the file from chunking. It intentionally excludes files that have a timestamp which is the same as the newest timestamp in the created archive.

So, if you see an ‘A’ status for unchanged file(s), they are likely the files with the most recent timestamp in that archive.

This is expected: it is to avoid data loss with files that are backed up from a snapshot and that are immediately changed after the snapshot (but within timestamp granularity time, so the timestamp would not change). Without the code that removes these files from the files cache, the change that happened right after the snapshot would not be contained in the next backup as Borg would think the file is unchanged.

This does not affect deduplication, the file will be chunked, but as the chunks will often be the same and already stored in the repo (except in the above mentioned rare condition), it will just re-use them as usual and not store new data chunks.

If you want to avoid unnecessary chunking, just create or touch a small or empty file in your backup source file set (so that one has the latest timestamp, not your 50GB VM disk image) and, if you do snapshots, do the snapshot after that.

Since only the files cache is used in the display of files status, those files are reported as being added when, really, chunks are already used.

By default, ctime (change time) is used for the timestamps to have a rather safe change detection (see also the --files-cache option).

Furthermore, pathnames recorded in files cache are always absolute, even if you specify source directories with relative pathname. If relative pathnames are stable, but absolute are not (for example if you mount a filesystem without stable mount points for each backup or if you are running the backup from a filesystem snapshot whose name is not stable), borg will assume that files are different and will report them as ‘added’, even though no new chunks will be actually recorded for them. To avoid this, you could bind mount your source directory in a directory with the stable path.

It always chunks all my files, even unchanged ones!

Borg maintains a files cache where it remembers the timestamp, size and inode of files. When Borg does a new backup and starts processing a file, it first looks whether the file has changed (compared to the values stored in the files cache). If the values are the same, the file is assumed unchanged and thus its contents won’t get chunked (again).

Borg can’t keep an infinite history of files of course, thus entries in the files cache have a “maximum time to live” which is set via the environment variable BORG_FILES_CACHE_TTL (and defaults to 20). Every time you do a backup (on the same machine, using the same user), the cache entries’ ttl values of files that were not “seen” are incremented by 1 and if they reach BORG_FILES_CACHE_TTL, the entry is removed from the cache.

So, for example, if you do daily backups of 26 different data sets A, B, C, …, Z on one machine (using the default TTL), the files from A will be already forgotten when you repeat the same backups on the next day and it will be slow because it would chunk all the files each time. If you set BORG_FILES_CACHE_TTL to at least 26 (or maybe even a small multiple of that), it would be much faster.

Besides using a higher BORG_FILES_CACHE_TTL (which also increases memory usage), there is also BORG_FILES_CACHE_SUFFIX which can be used to have separate (smaller) files caches for each backup set instead of the default one (big) unified files cache.

Another possible reason is that files don’t always have the same path, for example if you mount a filesystem without stable mount points for each backup or if you are running the backup from a filesystem snapshot whose name is not stable. If the directory where you mount a filesystem is different every time, Borg assumes they are different files. This is true even if you back up these files with relative pathnames - borg uses full pathnames in files cache regardless.

It is possible for some filesystems, such as mergerfs or network filesystems, to return inconsistent inode numbers across runs, causing borg to consider them changed. A workaround is to set the option --files-cache=ctime,size to exclude the inode number comparison from the files cache check so that files with different inode numbers won’t be treated as modified.

Is there a way to limit bandwidth with Borg?

To limit upload (i.e. borg create) bandwidth, use the --remote-ratelimit option.

There is no built-in way to limit download (i.e. borg extract) bandwidth, but limiting download bandwidth can be accomplished with pipeviewer:

Create a wrapper script: /usr/local/bin/pv-wrapper

#!/bin/sh
    ## -q, --quiet              do not output any transfer information at all
    ## -L, --rate-limit RATE    limit transfer to RATE bytes per second
RATE=307200
pv -q -L $RATE  | "$@"

Add BORG_RSH environment variable to use pipeviewer wrapper script with ssh.

export BORG_RSH='/usr/local/bin/pv-wrapper ssh'

Now Borg will be bandwidth limited. The nice thing about pv is that you can change rate-limit on the fly:

pv -R $(pidof pv) -L 102400

How can I avoid unwanted base directories getting stored into archives?

Possible use cases:

• Another file system is mounted and you want to back it up with original paths.

• You have created a BTRFS snapshot in a /.snapshots directory for backup.

To achieve this, run borg create within the mountpoint/snapshot directory:

# Example: Some file system mounted in /mnt/rootfs.
cd /mnt/rootfs
borg create rootfs_backup .

Another way (without changing the directory) is to use the slashdot hack:

borg create rootfs_backup /mnt/rootfs/./

I am having troubles with some network/FUSE/special filesystem, why?

Borg is doing nothing special in the filesystem, it only uses very common and compatible operations (even the locking is just “rename”).

So, if you are encountering issues like slowness, corruption or malfunction when using a specific filesystem, please try if you can reproduce the issues with a local (non-network) and proven filesystem (like ext4 on Linux).

If you can’t reproduce the issue then, you maybe have found an issue within the filesystem code you used (not with Borg). For this case, it is recommended that you talk to the developers / support of the network fs and maybe open an issue in their issue tracker. Do not file an issue in the Borg issue tracker.

If you can reproduce the issue with the proven filesystem, please file an issue in the Borg issue tracker about that.

Why does running ‘borg check --repair’ warn about data loss?

Repair usually works for recovering data in a corrupted archive. However, it’s impossible to predict all modes of corruption. In some very rare instances, such as malfunctioning storage hardware, additional repo corruption may occur. If you can’t afford to lose the repo, it’s strongly recommended that you perform repair on a copy of the repo.

In other words, the warning is there to emphasize that Borg:

• Will perform automated routines that modify your backup repository

• Might not actually fix the problem you are experiencing

• Might, in very rare cases, further corrupt your repository

In the case of malfunctioning hardware, such as a drive or USB hub corrupting data when read or written, it’s best to diagnose and fix the cause of the initial corruption before attempting to repair the repo. If the corruption is caused by a one time event such as a power outage, running borg check --repair will fix most problems.

Why isn’t there more progress / ETA information displayed?

Some borg runs take quite a bit, so it would be nice to see a progress display, maybe even including a ETA (expected time of “arrival” [here rather “completion”]).

For some functionality, this can be done: if the total amount of work is more or less known, we can display progress. So check if there is a --progress option.

But sometimes, the total amount is unknown (e.g. for borg create we just do a single pass over the filesystem, so we do not know the total file count or data volume before reaching the end). Adding another pass just to determine that would take additional time and could be incorrect, if the filesystem is changing.

Even if the fs does not change and we knew count and size of all files, we still could not compute the borg create ETA as we do not know the amount of changed chunks, how the bandwidth of source and destination or system performance might fluctuate.

You see, trying to display ETA would be futile. The borg developers prefer to rather not implement progress / ETA display than doing futile attempts.

See also: https://xkcd.com/612/

Why am I getting ‘Operation not permitted’ errors when backing up on sshfs?

By default, sshfs is not entirely POSIX-compliant when renaming files due to a technicality in the SFTP protocol. Fortunately, it also provides a workaround to make it behave correctly:

sshfs -o workaround=rename user@host:dir /mnt/dir

How do I rename a repository?

There is nothing special that needs to be done, you can simply rename the directory that corresponds to the repository. However, the next time borg interacts with the repository (i.e, via borg list), depending on the value of BORG_RELOCATED_REPO_ACCESS_IS_OK, borg may warn you that the repository has been moved. You will be given a prompt to confirm you are OK with this.

If BORG_RELOCATED_REPO_ACCESS_IS_OK is unset, borg will interactively ask for each repository whether it’s OK.

It may be useful to set BORG_RELOCATED_REPO_ACCESS_IS_OK=yes to avoid the prompts when renaming multiple repositories or in a non-interactive context such as a script. See Deployment for an example.

My backup disk is full, what can I do?

Borg cannot work if you really have zero free space on the backup disk, so the first thing you must do is deleting some files to regain free disk space. See Important note about free space for further details.

Some Borg commands that do not change the repository might work under disk-full conditions, but generally this should be avoided. If your backup disk is already full when Borg starts a write command like borg create, it will abort immediately and the repository will stay as-is.

Miscellaneous

macOS: borg mounts not shown in Finder’s side bar

https://github.com/osxfuse/osxfuse/wiki/Mount-options#local

Read the above first and use this on your own risk:

borg mount -olocal REPO MOUNTPOINT

Requirements for the borg single-file binary, esp. (g)libc?

We try to build the binary on old, but still supported systems - to keep the minimum requirement for the (g)libc low. The (g)libc can’t be bundled into the binary as it needs to fit your kernel and OS, but Python and all other required libraries will be bundled into the binary.

If your system fulfills the minimum (g)libc requirement (see the README that is released with the binary), there should be no problem. If you are slightly below the required version, maybe just try. Due to the dynamic loading (or not loading) of some shared libraries, it might still work depending on what libraries are actually loaded and used.

In the borg git repository, there is scripts/glibc_check.py that can determine (based on the symbols’ versions they want to link to) whether a set of given (Linux) binaries works with a given glibc version.